j

  • The Allergenco-D IAQ air sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, dusts, and other airborne particulates. It has a well-designed impaction trace and collects at a rate of 15 liters per minute.
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • EPA approved water analysis to detect – Presence/Absence for Total Coliforms and E. coli. *Consult with your lender before purchasing a collection kit. In some instances, a licensed third-party sample collector is required.
  • EPA approved water analysis to detect - Nitrate, nitrite, pH, lead, and presence/absence test for total coliforms and E. coli. If you are seeking an FHA, VA or USDA home loan, this water panel follows EPA approved methods and should meet most mortgage lender requirements. Always consult the mortgage lender about specific testing requirements prior to sampling.
  • This product was designed so that Corrosive drywall may be easily identified by the home owner. The test kit consists of 10 copper coupons for placement throughout the home over a period of 30 days. Easy to use, the copper coupons may be returned to the lab for comparison to coupons that have been corroded by known Corrosive drywall reference materials at no additional charge. The identification of corrosion, utilizing this at home method, may serve as evidence in identifying Corrosive drywall as laid out by the Consumer Product Safety Commission in their 2010 publication Interim Guidance- Identification of Homes with Corrosion from Problem Drywall.

    Test Instructions:

    Step 1– Remove copper coupons from plastic bags and place them in 10 different locations around the building/structure you are testing. Be sure to not throw the plastic bags away. Do not apply tape or any other substance to the coupons. Step 2– Wait 30 days. Make sure that the copper coupons are not disturbed/damaged. Step 3– After 30 days, collect the copper coupons with gloved hands and place each one individually back in the plastic bags they came in. Step 4– Send the coupons back to our lab and wait for your results!
  • Analysis of Swab or Tape Lift samples using microscopy. Same Day turnaround on projects with less than 20 samples if received before 2:00 PM EST. Regular turnaround time is 24 hours. Rush analysis available at additional cost of $25 per sample during regular hours of operation and $50 per sample for Saturday processing. *Analysis differs from qPCR Tests (like the Big 2 Test). The Direct Exam is primarily used to examine visible mold growth, while qPCR tests are used to examine samples of dust that may contain traces of mold and bacteria.* Any and all shipping will be processed on weekdays during hours of operation. Any item purchased after 3:00 pm EST will be processed the following business day.  
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • The dust collector is a molded plastic device (with an inner capture basket) that fits onto the wand of most vacuum cleaners. Used to take samples of indoor molds and allergens. Click here for EPA sampling instructions for ERMI
  • The MegaLite IAQ air pump starter kit is a great package for new and existing inspectors. The kit includes a pre-calibrated pump, tripod, vinyl tubing, heavy duty case, 4 air cassettes, 4 swabs, 4 tape lifts, and 2 M-TRAP® air cassettes. Price is $349.99 plus state tax (only applicable in the state of Tennessee).
  • The e-MaxX® IAQ pump is a linear type pump which is very small in size and produces a high volume of vacuum airflow. The e-MaxX® is ideally suited for use with bio impactors at flow rates up to 30 liters per minute.
  • The HYDRO-FOG® is a commercial grade, disinfectant fogging machine capable of utilizing all water-based, FDA–registered and approved-for-fogging cleaners. With its ultrasonic homogenizers, commonly referred to as “sonicators,” and toggle-enabled heating element, the HYDRO-FOG® provides tremendous versatility and potency. The use of a sonicator rather than the common atomizer gives the HYDRO-FOG® a competitive edge, creating particles of 5 microns or less in size. Compared to atomizer foggers which typically produce particles of around 20 microns in size, the use of sonicators drastically increases surface area coverage. When fogging chemicals such as peroxide, the heating element plays its part by effectively “activating” the peroxide, increasing its potency. The HYDRO-FOG® can be used across the commercial, industrial, manufacturing, healthcare and residential sectors.
Go to Top