Category Options
-
Simplify volatile organic compound (VOC) air sampling with the Accordion Box-Bag. Capture up to 1 liter of air in approximately 25 seconds, no pump required. Accordion Box-Bags are lightweight, durable, won’t crack or shatter, and are reusable. Box-Bags must be cleaned after each use. Number of times a box-bag can be reused will vary. Accordion Box-Bag arrives ready to use. Cleaning Fee of $49.99 includes: accordion box-bag and nozzle inspection, triple ultra pure 99.99% nitrogen flush, and VOC QC. -
The is a linear type pump which is very small in size and produces a high volume of vacuum airflow. The e-MaxX® is ideally suited for use with bio impactors at flow rates up to 30 liters per minute. The Inspector Starter Kit is a great package for new and existing inspectors. The kit includes the E-MaxX® IAQ pre-calibrated pump, tripod, vinyl tubing, heavy duty case, and four each: air cassettes (AllergencoD or Micro5), M-TRAP® air cassettes , Swabs, and Tape Lifts. The E-MaxX®, the next generation “Lite” pump, uses high efficiency linear diaphragm technology to produce a quiet operation with minimal moving parts. An ideal choice for any IAQ air sampling. The E-MaxX pump offers:
- Heavy Duty construction with aluminum used at both the suction and discharge port locations to alleviate downtime due to broken fittings.
- Longer pump life with no bearings to replace.
- Quiet operation with a sound level of 39 dB @ 3 feet and weighing only 4 lbs.
- Easy to carry with integrated handle and reinforced cord attachment.
- Adjustable flow of 2 LPM – 30 LPM.
- Designed, machined, assembled and tested in the USA.
-
The Wall Check Adaptor was designed as an attachment for the air cassettes to ease inner wall sampling. Connect one side of the adaptor to the air cassette, create a ¼” hole in drywall and insert the tubing. Single-use. Comes in a Pack of 10
-
The CAP test is derived from the names of the dominant indoor molds Cladosporium, Aureobasidium, Penicillium with species selection based on their prevalence of EPA identified water intrusion molds1. The CAP-14 and CAP-15 are top selling tests for health-related and mycotoxin mold issues. Originally developed by Dr. Joseph Sturgeon, the CAP tests are used for assessing mold exposure in a home. Assured Bio later improved this test by converting sample collection to a swab from the original air pump and filter method. Key Features:
- Comprehensive Mold Detection: species were selected for their allergenic and toxic properties.
- Species Specificity: detects and quantifies molds relevant for indoor exposures and compromised health.
- Dust Sampling: designed to analyze dust from any surface collected with a sterile swab.
-
Select this test for semi-quantitative results for Coliform and Escherichia coli (E. coli) bacteria. Data are reported as Most Probable Number, 95% upper limit, 95% lower limit. Consuming water with these bacteria can result is recurring gastro-intestinal illness, with symptoms such as stomach cramping and diarrhea. Wells and springs can receive contaminants from surrounding land activities or septic systems, and biofilms can become established in plumbing, which is why the EPA recommends annual bacterial testing, as changing conditions can introduce new risks. This test is recommended if:
- You are served by a private well or spring.
- This is your daily water source.
- Small children, elderly adults, immunocompromised, pregnant, or nursing individuals consume the water.
- After flood events.
- You notice a musty, moldy, or mildew-like smell or taste in the water, or observe biofilm buildup or other microbial growth on faucets and fixtures.
-
The Hygiena UltraSnap™ ATP Surface Test Swab is a user-friendly, all-in-one ATP sampling test used with Hygiena luminometers. :
- Accuracy – UltraSnap uses a unique liquid-stable reagent providing superior accuracy, longer-lasting signal strength, and more reproducible results.
- Shelf Life – 15 months at refrigerated temperatures and four weeks at room temperature.
- Size – small, pen-sized collection device.
- Environmentally Friendly – made of 100% recyclable plastic, used devices may be discarded in the recycle bin.
-
The Mold Direct Exam, aka MoldScan. Sample is collected with a swab or tape-lift for a quick, easy, and low-cost solution for detecting mold in your home. Utilizing advanced microscopy techniques, this is the ideal option for a mold screening or preliminary investigation. When mold is detected, results are reported as present and qualitative amounts provided (low, medium, high) for 36 mold spores and other fungal structures. Which Collection Method Should I Use? Use a Swab
- For wet or heavily soiled surfaces
- Uneven, soft, and porous surfaces
- In tough to reach spaces
- When you suspect mold but don’t see active growth
- When growth is visible
- For hard, flat, nonporous surfaces
-
The SystemSURE PLUS ATP Monitoring System with SureTrend Software is a tool that will help any environmental investigator or restoration contractor provide customers with immediate feedback and decision-making capability. The SystemSURE PLUS Luminometer measures Adenosine Triphosphate (ATP), the universal energy molecule found in all animal, plant, bacterial, yeast, and mold cells. INCLUDES:
- Luminometer with Stand (SS3H)
- Protective Case (SSCC01)
- Manual + System Implementation Guide
- Data Analysis Software
-
Routine monitoring for Legionella bacteria is essential for outbreak prevention. Assured Bio Labs offers Legionella testing and analysis services for healthcare, federal buildings, manufacturing, and more. Assured Bio Labs is experience in Legionella Testing and Analysis
- CDC Elite Certified since 2009: Laboratory #5001635
- AIHA-LAP, LLC accreditation - Lab ID# 183867
- 14 Years of Legionella Analysis Experience
- Quality Control Program committed to our quality assurance standards that include quality control, quality assessment, and data integrity
- Additional Educational Resources to Prepare your Team
-
Zefon Bio Pump adapter for M-TRAP® air cassettes. Expand into DNA & RNA air sampling by using the M-TRAP® Zefon Bio Pump Adapter. The M-TRAP® is a unique air sampling cassette developed specifically for the rapid capture and analysis of airborne fungi, bacteria, and viruses using state-of-the-art DNA & RNA analysis. Simply attach your adapter to your Zefon Bio Pump, connect your M-TRAP®, and begin sampling! The M-TRAP® is compatible with the Buck BioAire Pump and can be connected via 1/4” tubing commonly used with air sampling pumps that are currently on the market (such as the E-MaxX IAQ Air Sampling Pump). Any and all shipping will be processed on weekdays during hours of operation. Any item purchased after 3:30 pm EST will be processed the following business day.
-
The HYDRO-FOG® is a commercial grade, disinfectant fogging machine capable of utilizing all water-based, FDA–registered and approved-for-fogging cleaners. With its ultrasonic homogenizers, commonly referred to as “sonicators,” and toggle-enabled heating element, the HYDRO-FOG® provides tremendous versatility and potency. The use of a sonicator rather than the common atomizer gives the HYDRO-FOG® a competitive edge, creating particles of 5 microns or less in size. Compared to atomizer foggers which typically produce particles of around 20 microns in size, the use of sonicators drastically increases surface area coverage. When fogging chemicals, such as peroxide, the heating element plays its part by effectively “activating” the peroxide, increasing its potency. The HYDRO-FOG® can be used across the commercial, industrial, manufacturing, healthcare and residential sectors.
-
Survey of Indoor Molds (SIM) molecular analysis screens for 36 species, aligned with the EPA’s ERMI analysis standards. Perfect for non-carpeted spaces and settled dust from any surface. For the best results, sample dust accumulated within the last two weeks. Key Features:
- Whole house sampling: collect dust from one to ten locations with a single swab.
- Detailed Identification: every mold spore is identified and quantified.
- Mold Identification: identify historical, recent and current mold growth in a home.
- Rapidly determine the root cause of mold contamination.
- Develop a Mold Timeline: Location and sample settled dust with a sterile swab. Wipe down location(s), wait one week and resample newly settled dust in the same location(s) with a second swab.
