-
The Wall Check Adaptor was designed as an attachment for the air cassettes to ease inner wall sampling. Connect one side of the adaptor to the air cassette, create a ¼” hole in drywall and insert the tubing. Single-use. Comes in a Pack of 10 -
The WhisperCare® is a continuous air monitoring system designed to test facilities for mold, bacteria and viruses using DNA & RNA analysis. With its low decibel output, your facility can continuously collect air samples without disturbing occupants from their day-to-day routine. A longer capture rate of hours or days increases the accuracy of data when tracking down the source of contamination. WhisperCare® Air Pumps are available to rent. Call the Lab for details and rates. M-TRAPS® are sold separately: Click here to purchase M-TRAPS®
-
The Micro5 IAQ sampling cassette was pioneered to evenly and quantitatively collect mold & fungal spores, fibers, dander, insect components and other airborne contaminants. Deposition of particles/spores onto the adhesive is uniform in all directions due to spore trap design. The Micro5 is designed to operate at a flow ratee of 5 liters per minute for durations ranging from one to 10 minutes. Compatible with traditional vacuum pumps, as well as most portable units. Connect to a vacuum source with either a ½” or ¼” converter or directly with ¼” tubing.
-
Zefon Bio Pump adapter for M-TRAP® air cassettes. Expand into DNA & RNA air sampling by using the M-TRAP® Zefon Bio Pump Adapter. The M-TRAP® is a unique air sampling cassette developed specifically for the rapid capture and analysis of airborne fungi, bacteria, and viruses using state-of-the-art DNA & RNA analysis. Simply attach your adapter to your Zefon Bio Pump, connect your M-TRAP®, and begin sampling! The M-TRAP® is compatible with the Buck BioAire Pump and can be connected via 1/4” tubing commonly used with air sampling pumps that are currently on the market (such as the E-MaxX IAQ Air Sampling Pump). Any and all shipping will be processed on weekdays during hours of operation. Any item purchased after 3:30 pm EST will be processed the following business day.
-
The M-TRAP® is a unique air sampling cassette developed specifically for the rapid capture and analysis of airborne fungi, bacteria, and viruses using state-of-the-art DNA & RNA analysis. It embodies the next generation of capture technology for residential and occupation mold exposure assessment. The M-TRAP® excels where spore trap and agar impaction falls short —spore capture efficiency and turnaround time. M-TRAP® cassettes may be connected via 1/4” tubing to most standard air sampling pumps, is compatible with the Buck BioAire Pump and the Zefon Bio-Pump (adapter required). Sample at 15 liters per minute for 10 minutes. For long-term sampling of hours to days, use the WhisperCare ® Continuous Air Monitoring System. In order to submit samples using our red M-TRAP® cassette, all clients must first contact the lab to complete an account form. Any and all shipping will be processed on weekdays during hours of operation. Any item purchased after 3:30 pm EST will be processed the following business day.
Learn how to collect your sample
-
The is a linear type pump which is very small in size and produces a high volume of vacuum airflow. The e-MaxX® is ideally suited for use with bio impactors at flow rates up to 30 liters per minute. The Inspector Starter Kit is a great package for new and existing inspectors. The kit includes the E-MaxX® IAQ pre-calibrated pump, tripod, vinyl tubing, heavy duty case, and four each: air cassettes (AllergencoD or Micro5), M-TRAP® air cassettes , Swabs, and Tape Lifts. The E-MaxX®, the next generation “Lite” pump, uses high efficiency linear diaphragm technology to produce a quiet operation with minimal moving parts. An ideal choice for any IAQ air sampling. The E-MaxX pump offers:
- Heavy Duty construction with aluminum used at both the suction and discharge port locations to alleviate downtime due to broken fittings.
- Longer pump life with no bearings to replace.
- Quiet operation with a sound level of 39 dB @ 3 feet and weighing only 4 lbs.
- Easy to carry with integrated handle and reinforced cord attachment.
- Adjustable flow of 2 LPM – 30 LPM.
- Designed, machined, assembled and tested in the USA.
-
The HYDRO-FOG® is a commercial grade, disinfectant fogging machine capable of utilizing all water-based, FDA–registered and approved-for-fogging cleaners. With its ultrasonic homogenizers, commonly referred to as “sonicators,” and toggle-enabled heating element, the HYDRO-FOG® provides tremendous versatility and potency. The use of a sonicator rather than the common atomizer gives the HYDRO-FOG® a competitive edge, creating particles of 5 microns or less in size. Compared to atomizer foggers which typically produce particles of around 20 microns in size, the use of sonicators drastically increases surface area coverage. When fogging chemicals, such as peroxide, the heating element plays its part by effectively “activating” the peroxide, increasing its potency. The HYDRO-FOG® can be used across the commercial, industrial, manufacturing, healthcare and residential sectors.
-
The E-MaxX®, next generation “Lite” pump, uses high efficiency linear diaphragm technology to produce a quiet operation with minimal moving parts. An ideal choice for any IAQ air sampling. This pump offers:
- Heavy Duty construction with aluminum used at both the suction and discharge port locations to alleviate downtime due to broken fittings.
- Longer pump life with no bearings to replace.
- Quiet operation with a sound level of 39 dB @ 3 feet and weighing only 4 lbs.
- Easy to carry with integrated handle and reinforced cord attachment.
- Adjustable flow of 2 LPM – 30 LPM.
- Designed, machined, assembled and tested in the USA.
- Pumps should be calibrated annually. Call the lab for details.
-
This cassette us used to collect dust samples using a vacuum cleaner. The dust collector is a molded plastic device with an inner capture basket that fits onto the wand of most vacuum cleaners. Used to take samples of indoor molds and allergens. This sampling collector can be used for an ERMI analysis. The Environmental Relative Moldiness Index, developed by the EPA for 36 species of mold. Click here for EPA sampling instructions for ERMI
-
Easily detect Corrosive drywall with this 30-Day test, Laboratory analysis included. This product was designed for the homeowner to detect corrosive drywall. KIT consists of 10 copper coupons for placement throughout the home over a period of 30 days. Return the copper coupons to the lab for comparison to coupons that have been corroded by known Corrosive drywall reference materials. The identification of corrosion, utilizing this at home method, may serve as evidence in identifying Corrosive drywall as laid out by the Consumer Product Safety Commission in their 2010 publication Interim Guidance- Identification of Homes with Corrosion from Problem Drywall. KIT includes instructions, 10-copper coupons, laboratory analysis
-
The Hygiena UltraSnap™ ATP Surface Test Swab is a user-friendly, all-in-one ATP sampling test used with Hygiena luminometers. :
- Accuracy – UltraSnap uses a unique liquid-stable reagent providing superior accuracy, longer-lasting signal strength, and more reproducible results.
- Shelf Life – 15 months at refrigerated temperatures and four weeks at room temperature.
- Size – small, pen-sized collection device.
- Environmentally Friendly – made of 100% recyclable plastic, used devices may be discarded in the recycle bin.
-
The SystemSURE PLUS ATP Monitoring System with SureTrend Software is a tool that will help any environmental investigator or restoration contractor provide customers with immediate feedback and decision-making capability. The SystemSURE PLUS Luminometer measures Adenosine Triphosphate (ATP), the universal energy molecule found in all animal, plant, bacterial, yeast, and mold cells. INCLUDES:
- Luminometer with Stand (SS3H)
- Protective Case (SSCC01)
- Manual + System Implementation Guide
- Data Analysis Software
