Category Options
-
Quantification of Copper down to 0.1 parts per million (ppm). Copper can be found in drinking water due to corrosion of household plumbing systems, natural deposits, and industrial discharge. Copper exposure can cause gastrointestinal distress, liver or kidney damage. EPA maximum contamination limit is 1.3 (primary) and 1.0 ppm (secondary). Accreditation American Industrial Hygiene Association (AIHA)-Environmental Microbiology Laboratory, ID#: 183867 Tennessee DEC Division of Water Resources, Certified Microbiology Laboratory (ID# 03147). The scope of accreditation includes total coliform and E. coli. Kit includes Instructions, Sampling Materials, and Laboratory Analysis 2-Day Lab Turnaround Time -
Simplify volatile organic compound (VOC) air sampling with the Accordion Box-Bag. Capture up to 1 liter of air in approximately 25 seconds, no pump required. Accordion Box-Bags are lightweight, durable, won’t crack or shatter, and are reusable. Box-Bags must be cleaned after each use. Number of times a box-bag can be reused will vary. Accordion Box-Bag arrives ready to use. Cleaning Fee of $49.99 includes: accordion box-bag and nozzle inspection, triple ultra pure 99.99% nitrogen flush, and VOC QC.
-
The is a linear type pump which is very small in size and produces a high volume of vacuum airflow. The e-MaxX® is ideally suited for use with bio impactors at flow rates up to 30 liters per minute. The Inspector Starter Kit is a great package for new and existing inspectors. The kit includes the E-MaxX® IAQ pre-calibrated pump, tripod, vinyl tubing, heavy duty case, and four each: air cassettes (AllergencoD or Micro5), M-TRAP® air cassettes , Swabs, and Tape Lifts. The E-MaxX®, the next generation “Lite” pump, uses high efficiency linear diaphragm technology to produce a quiet operation with minimal moving parts. An ideal choice for any IAQ air sampling. The E-MaxX pump offers:
- Heavy Duty construction with aluminum used at both the suction and discharge port locations to alleviate downtime due to broken fittings.
- Longer pump life with no bearings to replace.
- Quiet operation with a sound level of 39 dB @ 3 feet and weighing only 4 lbs.
- Easy to carry with integrated handle and reinforced cord attachment.
- Adjustable flow of 2 LPM – 30 LPM.
- Designed, machined, assembled and tested in the USA.
-
The Wall Check Adaptor was designed as an attachment for the air cassettes to ease inner wall sampling. Connect one side of the adaptor to the air cassette, create a ¼” hole in drywall and insert the tubing. Single-use. Comes in a Pack of 10
-
The CAP test is derived from the names of the dominant indoor molds Cladosporium, Aureobasidium, Penicillium with species selection based on their prevalence of EPA identified water intrusion molds1. The CAP-14 and CAP-15 are top selling tests for health-related and mycotoxin mold issues. Originally developed by Dr. Joseph Sturgeon, the CAP tests are used for assessing mold exposure in a home. Assured Bio later improved this test by converting sample collection to a swab from the original air pump and filter method. Key Features:
- Comprehensive Mold Detection: species were selected for their allergenic and toxic properties.
- Species Specificity: detects and quantifies molds relevant for indoor exposures and compromised health.
- Dust Sampling: designed to analyze dust from any surface collected with a sterile swab.
-
Select this test for semi-quantitative results for Coliform and Escherichia coli (E. coli) bacteria. Data are reported as Most Probable Number, 95% upper limit, 95% lower limit. Consuming water with these bacteria can result is recurring gastro-intestinal illness, with symptoms such as stomach cramping and diarrhea. Wells and springs can receive contaminants from surrounding land activities or septic systems, and biofilms can become established in plumbing, which is why the EPA recommends annual bacterial testing, as changing conditions can introduce new risks. This test is recommended if:
- You are served by a private well or spring.
- This is your daily water source.
- Small children, elderly adults, immunocompromised, pregnant, or nursing individuals consume the water.
- After flood events.
- You notice a musty, moldy, or mildew-like smell or taste in the water, or observe biofilm buildup or other microbial growth on faucets and fixtures.
-
The Hygiena UltraSnap™ ATP Surface Test Swab is a user-friendly, all-in-one ATP sampling test used with Hygiena luminometers. :
- Accuracy – UltraSnap uses a unique liquid-stable reagent providing superior accuracy, longer-lasting signal strength, and more reproducible results.
- Shelf Life – 15 months at refrigerated temperatures and four weeks at room temperature.
- Size – small, pen-sized collection device.
- Environmentally Friendly – made of 100% recyclable plastic, used devices may be discarded in the recycle bin.
-
The Mold Direct Exam, aka MoldScan. Sample is collected with a swab or tape-lift for a quick, easy, and low-cost solution for detecting mold in your home. Utilizing advanced microscopy techniques, this is the ideal option for a mold screening or preliminary investigation. When mold is detected, results are reported as present and qualitative amounts provided (low, medium, high) for 36 mold spores and other fungal structures. Which Collection Method Should I Use? Use a Swab
- For wet or heavily soiled surfaces
- Uneven, soft, and porous surfaces
- In tough to reach spaces
- When you suspect mold but don’t see active growth
- When growth is visible
- For hard, flat, nonporous surfaces
-
The SystemSURE PLUS ATP Monitoring System with SureTrend Software is a tool that will help any environmental investigator or restoration contractor provide customers with immediate feedback and decision-making capability. The SystemSURE PLUS Luminometer measures Adenosine Triphosphate (ATP), the universal energy molecule found in all animal, plant, bacterial, yeast, and mold cells. INCLUDES:
- Luminometer with Stand (SS3H)
- Protective Case (SSCC01)
- Manual + System Implementation Guide
- Data Analysis Software
-
Routine monitoring for Legionella bacteria is essential for outbreak prevention. Assured Bio Labs offers Legionella testing and analysis services for healthcare, federal buildings, manufacturing, and more. Assured Bio Labs is experience in Legionella Testing and Analysis
- CDC Elite Certified since 2009: Laboratory #5001635
- AIHA-LAP, LLC accreditation - Lab ID# 183867
- 14 Years of Legionella Analysis Experience
- Quality Control Program committed to our quality assurance standards that include quality control, quality assessment, and data integrity
- Additional Educational Resources to Prepare your Team
-
Zefon Bio Pump adapter for M-TRAP® air cassettes. Expand into DNA & RNA air sampling by using the M-TRAP® Zefon Bio Pump Adapter. The M-TRAP® is a unique air sampling cassette developed specifically for the rapid capture and analysis of airborne fungi, bacteria, and viruses using state-of-the-art DNA & RNA analysis. Simply attach your adapter to your Zefon Bio Pump, connect your M-TRAP®, and begin sampling! The M-TRAP® is compatible with the Buck BioAire Pump and can be connected via 1/4” tubing commonly used with air sampling pumps that are currently on the market (such as the E-MaxX IAQ Air Sampling Pump). Any and all shipping will be processed on weekdays during hours of operation. Any item purchased after 3:30 pm EST will be processed the following business day.
-
The HYDRO-FOG® is a commercial grade, disinfectant fogging machine capable of utilizing all water-based, FDA–registered and approved-for-fogging cleaners. With its ultrasonic homogenizers, commonly referred to as “sonicators,” and toggle-enabled heating element, the HYDRO-FOG® provides tremendous versatility and potency. The use of a sonicator rather than the common atomizer gives the HYDRO-FOG® a competitive edge, creating particles of 5 microns or less in size. Compared to atomizer foggers which typically produce particles of around 20 microns in size, the use of sonicators drastically increases surface area coverage. When fogging chemicals, such as peroxide, the heating element plays its part by effectively “activating” the peroxide, increasing its potency. The HYDRO-FOG® can be used across the commercial, industrial, manufacturing, healthcare and residential sectors.
-
Survey of Indoor Molds (SIM) molecular analysis screens for 36 species, aligned with the EPA’s ERMI analysis standards. Perfect for non-carpeted spaces and settled dust from any surface. For the best results, sample dust accumulated within the last two weeks. Key Features:
- Whole house sampling: collect dust from one to ten locations with a single swab.
- Detailed Identification: every mold spore is identified and quantified.
- Mold Identification: identify historical, recent and current mold growth in a home.
- Rapidly determine the root cause of mold contamination.
- Develop a Mold Timeline: Location and sample settled dust with a sterile swab. Wipe down location(s), wait one week and resample newly settled dust in the same location(s) with a second swab.
-
The WhisperCare® is a continuous air monitoring system designed to test facilities for mold, bacteria and viruses using DNA & RNA analysis. With its low decibel output, your facility can continuously collect air samples without disturbing occupants from their day-to-day routine. A longer capture rate of hours or days increases the accuracy of data when tracking down the source of contamination. WhisperCare® Air Pumps are available to rent. Call the Lab for details and rates. M-TRAPS® are sold separately: Click here to purchase M-TRAPS®
-
Quantification of Lead down to 3 parts per billion (ppb). In water, lead is odorless, tasteless, and invisible, and even low levels are considered dangerous to your health. Contamination comes from lead pipes and lead solder in plumbing infrastructure including service lines; changes in water chemistry can cause corrosion, leading to higher levels of lead being released into the water supply. EPA maximum contamination limit is zero; action is recommended for levels exceeding 15 ppb. Key Reasons to Test Drinking Water for Lead:
- Plumbing Infrastructure especially for homes built before 1986 and if pipes corrode.
- Health: lead a toxic and a carcinogen. Even low levels can cause developmental issues in developing babies and children, including cognitive impairment, behavioral problems, and reduced IQ. In adults, long-term exposure may result in kidney damage, high blood pressure, and other serious health conditions.
- Protect Vulnerable Populations. Testing is especially important in households with young children, pregnant women, or nursing mothers, as these groups are at a higher risk of lead poisoning and its long-term effects.
- Peace of Mind knowing your family is protected from the harmful effects of lead.
-
Recommended for water quality testing in any home, building, or facility and for those served by a private well or spring. This panel addresses concerns related to natural water chemistry, nearby human activity, and plumbing infrastructure. Key Features:
- EPA-Approved Methods: Our water analysis follows EPA-approved methods, ensuring reliable results that meet most mortgage lender requirements, including FHA, VA, and USDA home loans.
- Comprehensive Testing: Detects a range of contaminants:
- Biological:Coliform, E. coli (presence/absence) Inorganic:Chloride, Nitrate, Nitrite, total Phosphate, Sulfate Metal: Arsenic, total Copper, total Iron, Lead, Magnesium, Manganese, Potassium Properties: Color, Conductivity, Hardness, pH, Total Suspended Solids
- Mortgage Loan Compliance: Appropriate for those seeking FHA, VA, or USDA home loans. Always consult your mortgage lender about specific testing requirements prior to sampling. In some instances, a licensed third-party sample collector is required.
- Well Water Safety: Perfect for properties served by private or shared wells, especially if there is a septic tank nearby. Health Protection: Essential for households with young children or other vulnerable individuals, as well as those concerned about agricultural runoff.
- Filtration System Assessment: Evaluate the effectiveness of your water filtration system.
-
Ensure the safety and quality of your water with our Basic Water Panel. This comprehensive test detects Nitrate, Nitrite, pH, Lead, and the presence of Coliform and E. coli bacteria, making it an essential tool for anyone using a private or shared well, or financing a home purchase through a loan agency. Key Features:
- EPA-Approved Methods: Our water analysis follows EPA-approved methods, ensuring reliable results that meet most mortgage lender requirements, including FHA, VA, and USDA home loans.
- Comprehensive Testing: Detects a range of contaminants:
- Mortgage Loan Compliance: Ideal for those seeking FHA, VA, or USDA home loans. Always consult your mortgage lender about specific testing requirements prior to sampling. In some instances, a licensed third-party sample collector is required.
- Well Water Safety: Perfect for properties served by private or shared wells, especially if there is a septic tank nearby. The EPA recommends annual testing of well water for bacteria, nitrate and nitrite.
- Health Protection: Essential for households with young children or other vulnerable individuals, as well as those concerned about agricultural runoff.
- Filtration System Assessment: Evaluate the effectiveness of your water filtration system.
-
The Basic Bacteria Test detects Coliform and Escherichia coli (E. coli), common bacteria that can pose significant health risks. The Presence/Absence test is an industry standard, as any detection of coliforms or E. coli bacteria in drinking water is considered a health hazard. Consuming water contaminated with these bacteria can lead to recurring gastrointestinal illness, with symptoms such as stomach cramps and diarrhea. Wells and springs can receive contaminants from surrounding land activities or septic systems, and biofilms can become established in plumbing, which is why the EPA recommends annual bacterial testing, as changing conditions can introduce new risks. This test is recommended if:
- You are served by a private well or spring
- This is your daily water source
- Small children, elderly adults, immunocompromised, pregnant, or nursing individuals consume the water.
- After flood events.
- You notice a musty, moldy, or mildew-like smell or taste in the water, or observe biofilm buildup or other microbial growth on faucets and fixtures.
-
BIG 2 Molecular Mold KIT Our most affordable Molecular (DNA) Mold Analysis, the BIG 2 provides unparalleled insights about the mold concentration in a home. The BIG 2 is a complete screen for the common water intrusion molds that include Stachybotrys (commonly referred to as toxic Black Mold) and Penicillium/Aspergillus species. The BIG 2 can be configured to include other key indicator molds for indoor health and structural decay. Results from a BIG 2 analysis can be used to
- Screen up to eight locations with a single swab
- Detect surface mold growth
- Determine the severity of mold contamination
- Identify the concentration of allergenic and mycotoxin producing molds
- Aspergillus / Penicillium Genus identification. Known for colonizing water damaged environments. Mycotoxin producing molds with small allergenic spores.
- Stachybotrys chartarum Species identification. Commonly known as toxic “black mold,” it produces spores with potent mycotoxins that cause severe respiratory issues and memory issues1, degrades wallpaper and coverings, while off-gassing profuse noxious odors called MVOCs.
- Cladosporium Species identification. This common allergenic mold thrives around HVAC diffusers and drafty windows. It colonizes surfaces where hot humid air meets cold air and water condenses. A recommended addition when HVAC contamination is suspected.
- Chaetomium Species identification. Colonizes wet floors and baseboards. It prefers softwoods like pine, wallpaper and textiles. Often visible as tiny black spots under carpet on tack board and subfloors. Produces mycotoxins and mutagens. Recommended when evidence indicates long-term water intrusion, slow leaks, and infiltration from heavy rainfall events.
- Trichoderma Species identification. This mold colonizes water saturated wood and is a precursor to structural wood-rot. Recommended for persistent, long-term water intrusion scenarios.
-
The E-MaxX®, next generation “Lite” pump, uses high efficiency linear diaphragm technology to produce a quiet operation with minimal moving parts. An ideal choice for any IAQ air sampling. This pump offers:
- Heavy Duty construction with aluminum used at both the suction and discharge port locations to alleviate downtime due to broken fittings.
- Longer pump life with no bearings to replace.
- Quiet operation with a sound level of 39 dB @ 3 feet and weighing only 4 lbs.
- Easy to carry with integrated handle and reinforced cord attachment.
- Adjustable flow of 2 LPM – 30 LPM.
- Designed, machined, assembled and tested in the USA.
- Pumps should be calibrated annually. Call the lab for details.
-
Easily detect Corrosive drywall with this 30-Day test, Laboratory analysis included. This product was designed for the homeowner to detect corrosive drywall. KIT consists of 10 copper coupons for placement throughout the home over a period of 30 days. Return the copper coupons to the lab for comparison to coupons that have been corroded by known Corrosive drywall reference materials. The identification of corrosion, utilizing this at home method, may serve as evidence in identifying Corrosive drywall as laid out by the Consumer Product Safety Commission in their 2010 publication Interim Guidance- Identification of Homes with Corrosion from Problem Drywall. KIT includes instructions, 10-copper coupons, laboratory analysis
-
This cassette us used to collect dust samples using a vacuum cleaner. The dust collector is a molded plastic device with an inner capture basket that fits onto the wand of most vacuum cleaners. Used to take samples of indoor molds and allergens. This sampling collector can be used for an ERMI analysis. The Environmental Relative Moldiness Index, developed by the EPA for 36 species of mold. Click here for EPA sampling instructions for ERMI
-
The ERMI test is an industry standard that offers a highly accurate and easy-to-understand method for assessing mold presence and health risks in a home. This analysis was developed by the EPA with the sample collected by vacuuming dust from carpet. For non-carpeted spaces, select the Survey of Indoor Mold KIT (SIM). Key Features:
- Comprehensive Detection: This panel includes 36 mold species, with 26 linked to water intrusion events such as Stachybotrys chartarum, Aspergillus fumigatus, Aspergillus versicolor, and Penicillium chysogenum. The remaining 10 species are exterior molds that act as the outdoor control.
- Carpeted Space Sampling: This test is specifically designed for carpeted spaces, with samples vacuumed from the carpet into a sterile dust collector (included with purchase). If your space lacks carpet, consider the SIM KIT, which tests for the same 36 mold species collected from dust on any surface.
- ERMI Score Included: The ERMI score, which ranges from -10 to 20, provides a relative moldiness index based on the levels of mold present. A higher score indicates a higher potential for mold-related health risks.
- User-Friendly: Receive an easy-to-understand report that clearly outlines the findings, helping you take informed action.
-
The Allergenco-D air sampling cassette was developed for the sampling and collection of aeroallergens and bioaerosols for quantitative analysis of mold spores, pollen, skin fragments, insects, dusts, and other airborne particulates. It has a well-designed impaction trace and collects at a standard rate of 15 liters per minute for durations ranging from one to 20 minutes. Compatible with traditional vacuum pumps, as well as most portable units. Connect to a vacuum source with either a ½” or ¼” converter or directly with ¼” tubing.
-
The Micro5 IAQ sampling cassette was pioneered to evenly and quantitatively collect mold & fungal spores, fibers, dander, insect components and other airborne contaminants. Deposition of particles/spores onto the adhesive is uniform in all directions due to spore trap design. The Micro5 is designed to operate at a flow ratee of 5 liters per minute for durations ranging from one to 10 minutes. Compatible with traditional vacuum pumps, as well as most portable units. Connect to a vacuum source with either a ½” or ¼” converter or directly with ¼” tubing.
-
The M-TRAP® is a unique air sampling cassette developed specifically for the rapid capture and analysis of airborne fungi, bacteria, and viruses using state-of-the-art DNA & RNA analysis. It embodies the next generation of capture technology for residential and occupation mold exposure assessment. The M-TRAP® excels where spore trap and agar impaction falls short —spore capture efficiency and turnaround time. M-TRAP® cassettes may be connected via 1/4” tubing to most standard air sampling pumps, is compatible with the Buck BioAire Pump and the Zefon Bio-Pump (adapter required). Sample at 15 liters per minute for 10 minutes. For long-term sampling of hours to days, use the WhisperCare ® Continuous Air Monitoring System. In order to submit samples using our red M-TRAP® cassette, all clients must first contact the lab to complete an account form. Any and all shipping will be processed on weekdays during hours of operation. Any item purchased after 3:30 pm EST will be processed the following business day.
Learn how to collect your sample
